Clik here to view.
Re: WorkCentre 7535 can't print color
Make sure the driver correctly identified the device: Also check in CWIS that BW is not set as a default, as that option often has a compatibility issue that makes it a "Policy" as in many drivers...
View ArticleRe: Gap on top of printed sheets Workcentre 6505N
I re-installed the driver, I restarted the Xerox printer, and restarted my workstation as well.I don't think it is a Windows issue because even the Information Startup page that automagically prints...
View ArticleRe: Docucolor 252 still having printing problems
Reload the Fiery completely, everything in the other thread made it look like the network itself was the issue. So now eliminate the possibility of the Fiery being the issue and wipe it out per the...
View ArticleRe: Gap on top of printed sheets Workcentre 6505N
Then it is a hardware issue where the sensor is at fault, which means every print has a section that is being printed on the roller because the paper isn't there to collect the toner. I highly suggest...
View ArticleRe: Xerox Color 800 Press heavy paper issues
In those weights short grain runs best. I also always run the heavier stocks out of drawer 2.
View ArticleeConceirge Supplies Assistant (Mac) - Java issues
I have a strange issue installing an updated version of the Xerox Supplies Assistant on OS X 10.4.4. Even though I have the latest version of Java the Supplies Assistant installer says to install...
View ArticlePrinting chapters with slip sheets on the J75
I am trying to print a document that is a merge of several files into chapters. The merge was created by selecting the "merge" feature while the document was in the hold qeue in the Command...
View ArticleClik here to view.
Re: eConceirge Supplies Assistant (Mac) - Java issues
I have not run across your particular issue, and have no access to an OS anywhere near as old as 10.4, but I would suggest installing the particular Java version it lists, since it is Java 7 and you...
View ArticleClik here to view.
Re: Printing chapters with slip sheets on the J75
Assuming Fiery and not Freeflow: In CWS5 go to the job properties and select MediaEnable the Slip sheets and the tray and size to be used Scroll down and define the Chapter Starts and enable the...
View ArticleRe: Cleaning a Phaser 6280
I'm running into a similar issue with my printer as well. I had to replace all the colors because they all ran out nearly the same time. I used nothing but Xerox brand but I'm now seeing blotches of...
View ArticleRe: Phaser 6280DN Magenta Color Marks
Getting the same issue here after I replaced all colors. Yellow, magenta, and blue are all blotching on any print I have.Let's get this figured out!
View ArticleRe: Cleaning a Phaser 6280
Hi Kikketer,Thank you for using the Support Forum. I am sorry you are having this frustrating issue. Please take a look at the solution for cleaning the Print Cartridge. If that does not help our...
View ArticleRe: Printing Error 22-319-04
v .222.06502 fixed this code if printing an A4 pdf. Have a tech come in and do an alt boot load of the latest spar or general release. Also make sure the paper trays are reading the correct size.
View ArticleRe: Printing Error 22-319-04
Thanks for the reply - as I said, I did upgrade to the latest firmware and am still having the issue.. I am certain that the correct paper size was selected but I will double check.
View ArticleRe: WorkCentre 6505 will not print black & white from desktop?
How about the same problem in windows?
View ArticleRe: WorkCentre 6505 will not print black & white from desktop?
Hi Jerry,Thank you for using the Support Forum. Please take a look at this solution for setting black and white in WIndows. Please consider contacting your support centre for further assistance if...
View ArticleXerox Workcenter 7556 printing issue
I have recently purchased Xerox Workcenter 7556 and can not seem to get it working. I am certain we have the correct driver and things are being sent to the printer but are failing to print. I have...
View ArticleRe: Xerox Workcenter 7556 printing issue
Sounds like a driver issue. Can you connect to the printer web page? If so can you import a pdf with the web page to see if that prints?
View ArticleRe: Xerox Workcenter 7556 printing issue
What's the best solution to find the correct driver? I spoke with Xerox and they sent me a link over which is still not working?
View Article