WorkCentre 6505 Imaging Unit error
Hi, We have a WorkCentre 6505 in which the imaging unit had to be replaced but with two different new imaging units it is always showing error message "091-912 - Imaging Unit Error - Remove Imaging...
View ArticleAirprinting software for non-airprint enabled machines?
Hello, I was asked by my supervisor to find information on an 'Airprint software for machines [that are not airprint enabled by default] that we can install onto a site's computer'. It sounds like...
View ArticleRe: Airprinting software for non-airprint enabled machines?
Airprint is a series of protocols, not really a software. Xerox does not make an application to make non-airprint enabled machines work via Airprint. Xerox does make Xerox Mobile Print, but that is an...
View ArticleRe: WorkCentre 6505 Imaging Unit error
Have you checked inside the machine for pieces of paper or one of those yellow ribbons that may have come off the first device and stayed in the machine when the device was removed? Just about anything...
View ArticleRe: Remote Printing on WorkCentre 7775
You need to be able to access the printer via it's host name or IP address, this is the same inside and outside of the network.The method of doing that is up to the network admin and is unrelated to...
View ArticleRe: WorkCentre 6505 Imaging Unit error
Hi Joe, Yes, I've checked and there are no pieces of paper inside the printer or pieces of the yellow ribbons.Can you please inform where the sensor is located in the printer so I can check it better?...
View ArticleClik here to view.
Re: PDF files hang in work centre queue
Try switching from RAW to LPR, but make sure LPR Byte Counting does not get enabled.
View ArticleRe: Win 7 32-bit driver for Work Centre XD 105f Printer
Hi Gmostell,Thank you for using the Support Forum. The global driver should give you a basic printing mode for the printer you have. It will not be a full featured driver that you may be used to....
View ArticleRe: Win 7 32-bit driver for Work Centre XD 105f Printer
The global driver does not support the printer fully so it won't find it. The Windows XP driver will very much work in Windows 7, and 8 and in some cases 10 with slight modification to the OS (To allow...
View ArticleRe: C75 keeps printing a canceled job
Hi SJMC,Thank you for using the Support Forum. Try stopping the spooler and then power off and back on the printer. Start the spooler again. If this does not clear the problem please consider...
View ArticleRe: C75 keeps printing a canceled job
From the printer side you can only change its IP address, that way the job being submitted will have no place to go, and will eventually fault. But that would of course break the driver installs on all...
View ArticleClik here to view.
Re: xerox 6280
Hello Fiery,now the printer printing some color spots, do you have any ideia about them??I need to know how I can find the chips part number of xerox 6280, Thank you very much until now, you help me a...
View ArticleRe: WorkCentre 6505 Imaging Unit error
With the old Imaging Unit the printer does not display the 091-912 error, only a message saying the IU should be replaced but it goes online and we are able to scan documents with it.Shouldn't it show...
View ArticleProblem with paper size missing workcentre 3665X
Hi, We have two xerox printers on our network along with 8 PCs running Windows 7. The problem is one PC. the paper size available is missinig. So when using IE, Word, Excel, Adobe Reader the option to...
View ArticlePrinting A2 (51/2 Bar) Envelopes on Versant 80
I'm having trouble getting the Verrsant 80 to print A2 envelopes. The error just says that whatever tray I'm sending to doesn't support the size.
View ArticlePhaser 6500 Controller Error 116-324
We recently deployed a replacement Phaser 6500 and almost immediately started receiving Controller Errors no matter what the print job, web site, Word, Excel, didn't matter. The previous Phaser...
View ArticleRe: Error Code 093-599 Xerox Color Cube 8700
Hi uboot,Thank you for using the Support Forum. The solution for that error 093-599 is to have the machine looked at by a technician. Please consider contacting your support centre for further...
View ArticleClik here to view.
Re: Phaser 6500 Controller Error 116-324
It could be defective but the more likely thing to do is give it a different IP address, then redirect the drivers to the new IP.The code is a catch all for network issues, but typically it is a job...
View ArticleRe: Printing Error 22-319-04
Well then, If you have a service contract with Xerox, I suggest you call support to have the latest SPAR (61.121.225.14700 at the time of writing this) or have a Service Representative onsite to do it...
View Article