Clik here to view.
Re: Print dialog takes ages to appear with Versant 80 with Fiery RIP
EFI had some really weird issues caused by DST with various drivers. I believe they fixed it for most models but can only confirm it was resolved for sure with the 560. Best bet for unfixed drivers is...
View ArticleRe: Print dialog takes ages to appear with Versant 80 with Fiery RIP
EFI link with an explanation from their own forum. (Direct link to pdf file warning) Also things mentioned here and here and here
View ArticleClik here to view.
Phaser 6500 prints straight horizontal lines in CMYK throughout the entire page
Hello, As of today, our Phaser 6500 has been printing solid CMYK lines horizontally across every page. It does not matter whether it's a self test or from a variety of different operating systems. It's...
View ArticleRe: Print dialog takes ages to appear with Versant 80 with Fiery RIP
Thank you for those answers: changing the settings doesn't seem to have helped anything, however the problem does seem to have appeared after a daylight savings change. I was in another office for 6...
View ArticleRe: Printing from multiple trays, command line
What I can say : The printer answers the ping.The socket connects to port 9100.I write the data above (PJL & Document).(Nothing to read from the socket.)I close the socket. Result : Nothing happens...
View ArticleClik here to view.
Phaser 8560 Can't select tray 3 anymore
Hello, Sorry for my english, My printer works great but I can't select tray 3 since 2 days anymore.It worked all fine but I selected 'Preprinted paper' in tray 3 but I changed it fast back to 'normal'...
View ArticleRe: WorkCentre 6015 does not print even in grayscale just because cyan...
Hi, thank you for your reply.I've just tried the suggested process with the cartridge removal and replacement once again.The problem stays the same (note, I'm translating the error message from Czech...
View ArticleRe: WorkCentre 6015 does not print even in grayscale just because cyan...
Hi chrvi,Thank you for using the Xerox forum.I would suggest that you review the following site and search the knowledge base for a potential solution or find the contact us link. Podpora a ovladače...
View ArticleRe: Phaser 6500 prints straight horizontal lines in CMYK throughout the...
Hi joshfThank you for using the Xerox forum.I would suggest that you perform the following.Reseat the Imaging Unitand if no change, then replace the Imaging Unit.If that does not correct it, the...
View ArticleRe: Phaser 6500 prints straight horizontal lines in CMYK throughout the...
Reseating the imaging unit worked like a charm. Thanks for the assistance!
View ArticleXerox d95 memory issue and firmware update
we have 2 xerox d95 printers with build in controller. if the printer prints a lot of jobs (i.e. 4000+) without a power cycle then eventually the printer would stop working. one of the error is - it...
View ArticleRe: ColorQube 8570DN won't print double-sided
I have found that this occurs if users print from the fold out tray (in my case they are printing labels). After printing from tray 2 the printer will ignore all double sided printing requests. If...
View ArticleRe: Xerox d95 memory issue and firmware update
You can upgrade easily, but downgrading requires special software to do, which I believe to be proprietary to Xerox. (Tech call needed) Xerox only ever has one firmware per device posted, which is the...
View ArticleClik here to view.
Re: Phaser 8560 Can't select tray 3 anymore
Easily fixed.Start > Devices and PrintersRight click the printer and go to Printer Properties.Go to the Configuration tab and change Paper trays to have One Extra tray
View ArticleClik here to view.
Re: Print dialog takes ages to appear with Versant 80 with Fiery RIP
Xerox is not responsible for the install of your drivers or updates. That is all on your IT. (Xerox Analysts are not covered by any maintenance agreement, they are at a cost) EFI provides patches...
View ArticleRe: Xerox d95 memory issue and firmware update
Recently my friend has the same issue and upon reading this thread I was able to recommend what to do to fix the problem. And now he's glad that this problem is solved!
View ArticleRe: Windows update requirements for Xerox print drivers on Windows 2003 server
Wow, that's great to hear. I don't have same problem tough :)
View ArticleClik here to view.
Re: Phaser 8560 Can't select tray 3 anymore
Thanks for your awnser! (sorry for my late reply, was very busy..)Anyway, I tried your solution but I "Can't" click on that option.....See picture:Thanks in advance
View ArticleRe: Problem with Mac driver on Workcentre 7120
Hi, I have started using MAC and find out that WorkCenter 7120 does not support Poscript. I have talked to a local service center of Xerox, they told me that WorkCenter7120 is an old technology, and...
View ArticleRe: Phaser 8560 Can't select tray 3 anymore
Change Automatisch (aanbevolen) to whatever the equivalent of Off is ;-) Then click OK and when you go back in you will be able to select it.
View Article