Re: Phaser 7500DN Automatic Paper size selection doesn't work
Thanks, that's helpful. It looks like it was Tray 1 being set to Automatic that was the main culprit of the problem where it would not print from Tray 2 unless specifically told too.Now if I could just...
View ArticlePhaser 6125 printing in grey
Hi there,My phaser 6125 is printing in grey rather than black. I've tried the following:- replace the cartridge- run all the admin tests through the menu, refresh the drum etc etc- cleaned the housing...
View ArticleRe: Xerox 510 Controller HD
Hi Jesgrew,Thank you for using the Support Forum. If you have not already resolved this issue, we suggest you search our online knowledgebase for this product: Xerox 510. Alternatively, you can visit...
View ArticlePhaser 7750 offline
My phaser 7750 went offline some days ago and refuses to return online. I have reinstalled the driver, changed the USB cable, applied some diagnostic programmes (such as FIXIT) and all say that the...
View ArticleRe: 6204 Wide Format - Dirty printout with lines
Hi ghedrick,Thank you for using the Support Forum. If you are copying please take a look at this solution for lines on copies. If you are printing the you would need to consider contacting your...
View ArticleRe: Slow First Page Out Spool on ConnectKey Devices
So basically, the moment i press print, it takes 3 seconds for the machine to receive the job, with the Ricoh's, it was instantaneous. I switched to LPR mode and lp as queue and it made no difference....
View ArticleAre There Margin or Bleed Settings on ConnectKey Devices?
Are There Margin or Bleed Settings on ConnectKey Devices? Users reporting when faxes come out, there is a margin border that blocks out some information from the sender. Any help would be appreciated.
View ArticleRe: WorkCentre 7835 Margins
I believe the standard margin on a 78xx series is .25 inch. So if there are 1 inch margins, its likely coming from the application. One easy option would be switching to a different driver such as...
View ArticleRe: Margins are not equal.
Do internal prints out of the machine also produce this "off center" effect? For example, the graphics demo page would be a good full coverage document to print. If this is off center, then you could...
View ArticleRe: Slow First Page Out Spool on ConnectKey Devices
The ConnectKey device will do a DNS lookup of the hostname of the computer sending a print to it, every time it recieves a print. The default setting of the device is DNS TIMEOUT of 5 seconds. If you...
View ArticleRe: Grey background printing on Workcentre 6015
I have seen bad power supplies in printers do this.
View ArticleRe: Slow First Page Out Spool on ConnectKey Devices
Do you know where that DNS timeout setting is?
View ArticleRe: Slow First Page Out Spool on ConnectKey Devices
On the webpage of the machine, properties tab, connectivity setup, in the wired IP Settings area select edit, clink on the DNS Tab. Just below where you enter the DNS servers, is the box for DNS Timeout
View ArticleRe: Phaser 7750 offline
Is it networked? Or just USB? If networked can you ping the IP address?If USB only, does Windows see it when you unplug it and plug it back in?If Windows sees it plugged in, how does it display in...
View ArticleRe: Are There Margin or Bleed Settings on ConnectKey Devices?
Try logging in as admin and going to Machine Status > Tools > Service Settings > Embedded fax settings > Paper Settings.I believe if you set it to Manual there will be a Reduce to fit...
View ArticleRe: Phaser 6125 printing in grey
Try this. I don't know that it will work on your model, but it did for a 6130.
View ArticleRe: CWW on Server 2012 R2 connectivity problem
Server blocking to Edge server?Ensure ports 443, 161 and 162 and Add the edge server hosted at http://dcs.support.xerox.com to a safe list in any proxy/firwall.
View ArticleRe: Problem printing in Mac OS X 10.10 (Yosemite)
Hi Guys I am having similar issues with My network printer / Photocopier Doc C3100I have tried the following : Connecting to it VIA IP address used the Xerox firmware for MAC - dindt work - it wioll...
View ArticleRe: Problem printing in Mac OS X 10.10 (Yosemite)
how did you chnage it . it wil not allow me only by creating a txt copy i can chnag it? thanks in advance
View Article