Re: Versant 80 crashes
Hi,It looks like the machine Low Voltage Pwer Supply to have a problem. Gabi
View ArticlePrinter stays off line
Since a week my printer stays off line, and I cannot find the problem. I restted the network, had the printer during 30 secs unpowered, no result. Help
View Articleerreur de scan
Bonjour,je eu une erreur au niveau SMB. j ai une machine xerox versalink C7020 je configurer SMB et je partage un dossier sur mon pcSurnom: scanType :IPv4Adresse IP: 192.168.1.9 port *:139 : Partager *...
View ArticleRe: Phaser 6500 Controller Error 116-324
Followed these instructions to resolve the same issue on a CM405
View ArticleFont won't print on Driver version 6.259.0.0
I used to use the Xerox PS Color Class Driver V1.1, but I could not select certain paper sizes to print to. I was trying to print on tabloid extra (12" x 18"), but could not. I also have a iMac that...
View ArticleRe: Xerox - WorkCentre 7220 (Settings Reset)
Just an update on this. So we had went for a period where jobs had been hidden and the queue wasn't visible. Now the jobs are once again appearing with "Printed Document" as the name and are visible to...
View ArticleFault Error 392.671.00
After a large print job I'm getting a System Error: Power Off then On Notify System Administrator. The fault history show fault: 392.671.00. What could be the problem?
View ArticleMachine not recognizing extra tray module
We have had a Phaser 4600 for a few years. We realized today that paper tray 3 is not recognized by the printer. The printer's configuration report claims that Tray 3 is not installed. This is not...
View ArticleRe: Fault Error 392.671.00
Hi,You must clean very well ADC sensor in back of the printer under the Belt Transfer. Gabi
View ArticleRe: Open Heat Error on M20i
More info to help diagnose the problem. The fuser was replaced with the correct one. The dealer tested both my original fuser and the replacement one and both test good. So.....Could the problem still...
View ArticleClik here to view.
WorkCentre 3215 wifi no longer working
Hello,I have a Xerox WorkCentre 3215 that does not connect to my wifi network anymore.I recently changed my router, but I have used the same SSID as the old wifi network and it is still 2.4 Ghz.I have...
View ArticleRe: WorkCentre 3215 wifi no longer working
I have found a solution from the last post in this thread:https://forum.tp-link.com/showthread.php?80246-Wireless-Printer-Samsung-C181W-will-not-connect-to-Archer-C9It looks like turning off Wifi...
View ArticleRe: Open Heat Error on M20i
It could be the Power Supply unit, because the fuser is powered by it.
View ArticleRe: Xerox - WorkCentre 7220 (Settings Reset)
Just to confirm. I had the same issue again with this printer. It was hiding documents well for a number of weeks and then decided to reset back to it's original settings through printer management on...
View Articledirect pipe clogs mainly cyan
I have multiple issues with the direct pipe assy clogging and dumping toner inside copier all over 2nd btr assy and ibt. i have replaced entire waste recycling sys multiple times. runs ok for couple...
View ArticleMF 5755 - Replaced Xerographic Module and now printing black pages!
Our Xerox MF 5755 was working fine when it started to print NEAR blank pages, so we figured out it was the Xerographic Module (or Transfer Unit) and when we replaced it, the printer is now printing...
View ArticleClik here to view.
Re: Font won't print on Driver version 6.259.0.0
It really isn't that it is the wrong driver, it is just the wrong type (V4/class drivers)They can be good, but the tech isn't quite finished yet. So stick with the V3 drivers for now. I suggest this...
View ArticleRe: Problem printing 2-sided Xerox Versalink C405
The problem listed is fixed by the solution posted, so if it did not work for you , you need to explain your issue as it is not the same as the one above.
View ArticleRe: MF 5755 - Replaced Xerographic Module and now printing black pages!
Hi,Machine Developer Module is defective, so replace it. Gabi
View Article