Hi DCRPI
↧
Re: Paper sticks to machine, falls on floor
↧
Xerox 5955 PostScript Fails TestPage
Windows 2012 server
Xerox 5955
When I install using PCL driver test pages work fine. As soon as I switch over to a PS driver, I can hit "Print Test Page". I see it in the queue, it releases from the queue, but does not print on the copier? The PS drivers are the latest version, and I've tried the model specific one as well as the xerox global.
Is there a setting in the Xerox that could cause this? Is there anywhere I can see an error of some kind, why it was blown away at the copier? I'm kinda of at a loss.
↧
↧
Re: Duplex printing problem - Workcentre 6605
It's a Postscript fault.
Assuming the paper is a stock that can be duplexed, try this.
File > Print > Advanced (1)
Set (2) to Send for Each page and re-submit, if it still fails, check the box for (3)
↧
Re: Purge Old Secure Prints never picked up?
Yes, 7220 minutes (5 days) is the maximum
↧
Re: DocuPrint 180 - PDF does not completely print.
Hi Printdiana,
Thank you for using the Support Forum. If this is happening on only one document consider making a copy of the document and try to print the copy. You indicate this is a PDF so try this in Adobe change to Print as Image and see if the documents will print that way. If the problem continues please consider contacting your support centre for further assistance.
↧
↧
Re: Inserting Pre-Printed Tabs into Print Job
Hi - Why is it when i select insert before pages, the first page is not pulled from the bypass but from try 4?
Thanks.
Thanks.
↧
Re: Versant 80 044-394
Have you tried reversing the SCSI cable that connects the V80 to the RIP?
↧
Re: Inserting Pre-Printed Tabs into Print Job
Depends on what your settings are, and unless you choose "insert before page 1" then page 1 is just going to use the settings of the job.
↧
3655i print size issue from Iphone Airprint
I am trying to print a PDF documents from my Iphone via Airprint and the size is wrong when it come out and it cuts off the top of the page. I have print the PDF file off of a laptop and it prints correctly. As well I have printed the file to a differnet Xerox machine in the office and we have not issues.
When we click the print it looks correct on the screen of the Iphone like it should work and print properly but when it come out of the 3655i machine it looks like the Picture attached.
I have attached the orrigional file and a picture of what it is printing. Any Ideas would greatly help as we need this file to print and something seems to be wrong.
Thanks
↧
↧
Gutter sizing for perfect bound book
A 7x10 inch perfect bound book of greater than 400 pages in length is being assembled on a Horizon BQ-270V Perfect Binder.
I am looking for guidance for calculating the size of the gutters adjacent the spine (i.e., the opposing inside margins closest to the spine).
It is my understanding that the size of the gutter is dependent in part on the weight of the paper, the total number of pages, and the acceptable level of stress applied to the spine when opening the book. While I have methods for calculating the size of the gutter, I am seeking a formula specific to the BQ-270V or Horizon binders in general.
Thank you.
↧
Re: Versant 80 044-394
It doesn't us a SCSI cable, the ones that look like Display Cables. I attempted to reverse them, but that didn't fix the message.
If I was to go replace those cables, what are they called?
↧
Will a professional finisher from a docucolor 252 work on a docucolor 250?
They look the same but don't want to buy it if I don't know for sure. Thanks in advance!
↧
Re: DC 242 weird printing problems after long time unused
It means its a Fiery issue.
↧
↧
Xerox WC 3345: duplex issues with windows drivers options
Dear all,
I have a WC 3345, and I obtain a strange behaviour whenever I set the print quality to "advanced" in the windows drivers.
Moreover, the manual does not seem to clearly explain where to adjust the parameters corresponding to the "advanced" print quality entry.
The actual problem is that whenever the print quality is set to "advanced" (see image below), in every duplex print the second page is shifted to the side of the sheet. I created a sample 2-page pdf and I acquired the back one, the original second page and the acquired counterpart follow below. (I put the images one below the other to highlight the shift to the right.)
Why this happens and how can it be fixed.
Regards.
Marco.
↧
Xerox Phaser 8560
Hello and good day! I don't know what I did wrong! I was having light stripes issues and i did the basic cleaning procedure. I wiped off the maintenance kit and some residual ink that was on the metal roller accessed through the top panel. Now the printer will not print anything at all. There was some smudging that appeared after and I did the cleaning test for that and now that's all gone. What did I do?
Thank you,
jessica.
↧
Re: Inserting Pre-Printed Tabs into Print Job
Thanks for the prompt response Joe.
Say I have 4 page pdf file.
Page 1: 9x11 (document size) Tab
Page 2: 8.5x11 page
Page 3: 9x11 (document size) Tab
Page 4: 8.5x11 page
I’m feeding the tabs via tray 5 (bypass)
I want the printer to do the following:
- Print “Exhibit 1” on page 1 and insert before page 2
- Print “Exhibit 2” on page 3 and insert before page 4
Please advise if possible with Xerox Color C60
Thanks.
↧
Re: Inserting Pre-Printed Tabs into Print Job
An insert cannot be printed on, the whole point of an insert is that it is already printed, and you are inserting it into another job you are printing.
Often of use to insert color pages into a BW job, which is printed on a BW printer to reduce cost, and can be used to insert a stock that cannot be fused properly on the device that is being used to print the majority (Magnetic paper for instance)
You just appear to want mixed media (print on more than one stock)
So if your pdf is designed as:
- Page 1: 9x11 (document size) Tab
- Page 2: 8.5x11 page
- Page 3: 9x11 (document size) Tab
- Page 4: 8.5x11 page
then the print commands in the driver are simple, for simplicity sake, I will use pages 1and 3 as the body of the job, and the driver would reflect that as this
Non-Fiery Fiery
Then we would do the body (8.5*11), which I considered the exception, it isn't an insert because you clearly state you want to print on it, then these would be the settings (You can't choose tray 4 without the Fiery, so you have to choose what is loaded in the tray you want (plain vs tabs)
Non Fiery Fiery
↧
↧
Re: 3655i print size issue from Iphone Airprint
Your iPhone is either selecting Landscape instead of Portrait, or SEF vs LEF paper and not bothering to rotate the document like a Mac/PC would.
So look in the app you are printing from for one of those 2 options.
↧
Re: Gutter sizing for perfect bound book
Xerox wouldn't have that information, you would need to go through Horizon, Xerox doesn't handle offline devices.
↧
Re: Inserting Pre-Printed Tabs into Print Job
Unless i missunderstood something about the Define Media for Pages(s), this would work if i have a small job but if my pdf file is 2000 pages does that mean i have to list every page in the Define Media for Page(s) separated by comma?
Also it would not let me select 9x11 for tab stock
↧