that might be out of my capabilities and messy?
↧
Re: Registration printing
↧
Re: Disable bypass tray on Xerox WorkCentre 3335
When the error message comes up, click the drop down in it and uncheck the error notification.
↧
↧
Re: Extra Heavy Duty Media Kit - Printer unreadable
Hi wprint,
Thank you for using the Support Forum. Please make sure that you have the bidirectional communication turned on for the port. Please see this article about how to locate that setting through the CWIS. See if that will clear up the issue if not consider removing the driver completely, restart your computer and then install the driver again. If it continues to fail please consider contacting your support centre for further assistance.
↧
Re: Poor quality printing
Hi Juarney,
Thank you for using the Support Forum. Please clean the inside of the machine. You can find the instructions in this article at the end of the article. If this does not help please consider contacting your support centre for further assistance.
↧
Combined feature limitation: Half Z-Fold & Stapling
Hello. Just posting this to see if anyone has experienced anything similar.
PDF document consists of 10 Letter, 11 Ledger pages
Print Properties 1-Sided, 1 Staple Left, Z Fold Half Sheet (for Ledger)
Limitation variations depending on DFE
Fiery Ex-i: Job does not appear at device Waiting Job queue. No prompts either.
Command Workstation error message:
“Exceeding Finishing[Left top single,Half Z-fold] Page Limit[10] for selected Media Type[Plain][71-82]gsm”
True. If the total job does not exceed 10 pages the combined finishing features will be applied.
Here's the weird thing...
Integrated Color Server: I can exceed 10 pages successfully. However, 19 is the limit for Staple & Half Z-Fold (Multiple Finishing, PCL V4 driver)
When 19 pages are exceeded (the job has 21 pgs.) the job will complete, ejecting the 19 pages and then the remaining 2 pages after, no staples.
↧
↧
Bad Quality Printing Xerox 3020
Good eveninig.
I bought the printer a couploe of months ago and this is my second time printing and i got very low quality in the impression, what should o do to get a normal impression
↧
Re: Smudged copy
Dear Gabi,
Thanks for your kind advice and I wil be guided accordingly. However, when the spring tension in the Fuser Unit is increased the machine gives error code, as if the motor overloaded in while engaging in raising the lower roller.
Regards
S. Jeevan
↧
Re: PHASER 3210 DRIVER
hi,I have this problem too , there isn't any Driver for my Printer Phaser 3210. I realy need this Driver because i cant use my device. Xerox support please help us!
Phaser 3210 ( PCL & USB ) Driver for Windows 7 64bit
↧
Phaser 8560 Power on but only solid red light
When I turn on the printer, I get only solid red light. Screen is blank. Fan is working. Lights on the motherboard is blinking but no warm up sequence. This happened after the printer was not responding when I couldn't get it to wake up. Tried removing the RAM and the display showed 'No RAM' or something like that. Switch to another SDRAM and nothing works too. Any other ideas how to fix this?
↧
↧
PAPER STOP: ALMOST AT EXIT OF start page/AFTER REMOVAL HAPPENS AGAIN AND AGAIN AT SAME MOMENT...
I can easily remove each time the sheet by opening the back pannel of the printer but when I print the next page it happens again. Printer has been switched off, unplugged from the eelctricity etc but nothing changes...
Any suggestions? Thanks in advance..
↧
Re: PAPER STOP: ALMOST AT EXIT OF start page/AFTER REMOVAL HAPPENS AGAIN AND AGAIN AT SAME MOMENT...
sorry the pictures didn't upload so I posted them again in a smaller form via answers
↧
Re: PAPER STOP: ALMOST AT EXIT OF start page/AFTER REMOVAL HAPPENS AGAIN AND AGAIN AT SAME MOMENT...
seems impossible to upload even small pictures here -;)...they appear perfect in the upload field before you press "post"and then disappear once posted...
↧
Re: Phaser 3020 print Exception Report / message: Assertion failed
Hi Marek_PL,
Thank you for using the Support Forum. Please try disabling the the bi-directional communication in the driver and see if that will fix the issue. Please see this article for information on how to disable bi-directional communication on the port. In the article it says to enable you will disable. If that does not help please consider contacting you local support centre for additional assistance.
↧
↧
Re: How to turn off B210?
Hi Jiri_kubat,
Thank you for using the Support Forum. Please take a look at this article on how to power on and power off the the machine. Please consider contacting your support centre for further assistance.
↧
Re: Problemi di stampa
Hello Danielina.
If you have not already resolved this issue, we suggest you search our online knowledgebase for this product: Xerox B215 Multifunction Printer.
Please consider contacting your support centre for further assistance.
↧
Horizontal lines in print even before fusing
Hi there guys.
I've been etting this problem as of late. Horizontal lines on print. As you can see from photos. And tis happens even before the image is fused to the paper. I even check the IBT to see how it looks on there. Looks ok but then yiu have the line.
Please see these links
https://www.dropbox.com/s/fehhc2og6xqzhzo/2020-11-11%2010.08.05.jpg?dl=0
https://www.dropbox.com/s/e7u96j00fjw6shw/2020-10-24%2009.21.43.jpg?dl=0
https://www.dropbox.com/s/n7he41i1mn4rsil/2020-10-24%2009.21.38.jpg?dl=0
Really need some assistance I would see the residue on the 2nd BTR but then still the same thing after wiping it off.
Thanks
I've been etting this problem as of late. Horizontal lines on print. As you can see from photos. And tis happens even before the image is fused to the paper. I even check the IBT to see how it looks on there. Looks ok but then yiu have the line.
Please see these links
https://www.dropbox.com/s/fehhc2og6xqzhzo/2020-11-11%2010.08.05.jpg?dl=0
https://www.dropbox.com/s/e7u96j00fjw6shw/2020-10-24%2009.21.43.jpg?dl=0
https://www.dropbox.com/s/n7he41i1mn4rsil/2020-10-24%2009.21.38.jpg?dl=0
Really need some assistance I would see the residue on the 2nd BTR but then still the same thing after wiping it off.
Thanks
↧
Black spots on edge when printing
Hello everyone,
My printer all of a sudden started printing some spts on the bottom edge of the paper.
This only happens when printing letter size paper. No problems when printing legal size.
Also when printing from tray # 5 (the one that I need to feed manually, on the side of the machine) ther is no such issue.
I am attaching a picture of the issue.
Any help greatly appreciated.
↧
↧
Re: PAPER STOP: ALMOST AT EXIT OF start page/AFTER REMOVAL HAPPENS AGAIN AND AGAIN AT SAME MOMENT...
Hi,
Check the condition of the lower exit rollers to be in contact with the upper roller, not to be dislodged
Gabi
↧
Color Calibration Problem
Xerox Versalink C7020 only black is printed correctly, other colors are fade and blurry. Automatic Colorcalibration doesn't help. Advanced color calibration gives result below. What should I Do?
↧
chybové hlášení tiskárny
Dobrý den, prosím o radu, přestala mi tisknout tiskárna XEROX WorkCentre 3225 , vytiskne to vždy informaci s error code 11-1312, version: PCL6 8.02 04-29-2014. Děkuji za pomoc.
↧