the questione is: fuser / drum sold together the
machine are 100% or 50%?
I have to talk to the president of xerox for an answer?
Many thanks.
↧
Re: XEROX WC 3615 fuser error (62000 prints)
↧
Re: XEROX WC 3615 fuser error (62000 prints)
Yes, they are "starter cartridges" that have about 50% life expectancy.
No you don't need to talk to the president, you just need to talk to customer relations, which you can get to via the link I posted that will provide the Italian office that can help you.
↧
↧
How print while missing a toner cartridge?
I have a workcentre 6015 and when I run out of Cyan (for example) I can't print anything! How can I make it print without using the Cyan?
↧
Re: XEROX WC 3615 fuser error (62000 prints)
Yes, they are "starter cartridges" that have about 50% life expectancy. OK
But starter fuser/drum expectancy is 50 %?
Many thanks.
↧
Re: How print while missing a toner cartridge?
There is no way to print color at all if there is one toner faulted.
Some printers allow you to print BW though, just make sure it is set to print in BW
And that the application you are printing from is not sending a color override, Acrobat/Reader for instance does this, so change it first ala File > Print > Advanced > Let Printer Determine Color
That may work, I don't have the particular printer to test for certainty that it is capable, but most are. The trouble is they all fault if they interpret a single pixel of color
↧
↧
Re: ERROR:Invaldifont
you can download from the xerox site a font utility, with this tool you can upload the missing font to the machine
↧
Re: Banner page ColorQube 9301 mandatory
I think i misunderstood the concept. Now when we print there is a first page where the ID, date and other info appears. I guess that's the "banner page". I was trying to configure the user ID and print date on every page, as header and footer as mandatory, as users can change that.
Maybe now is clear.
Thanks you so much for your support.
↧
Re: Banner page ColorQube 9301 mandatory
No problem, since it appears you mean this, that makes the answer a simple one. No.
Even on the basic Mobile Express driver that will always be selectable.
↧
phaser 8400 37,002.47:7517
Does anyone know what the error 37,002.47:7517 on the phaser 8400. It started when I turned it on and heard some clicking and then it sends this error. thanks for any help
↧
↧
Re: XEROX WC 3615 fuser error (62000 prints)
I sent an email to xerox because I want reimburse the cost of the copies that I could not print ( 140,000).
I'm waiting answer.
↧
Manual duplex on C70 - not registering and skewing
Hello, I am new to this forum and would appreciate any feedback. I have just upgraded from a Docucolor 260 (was having numerous issues) to a C70. I am still coming across same issues. I was assured that skewing wouldn't be a problem any more. And the image shift in command workstation (properties) has been giving me problems. Manual duplexing from bypass tray, stock coated 3 or heavyweight 4
and still having problems with skewing and not backing up properly. Also I have come across on the website and user manual
that some functions on the the fiery do not work with a Mac. Thank you,
↧
Re: Manual duplex on C70 - not registering and skewing
I would make sure that you are using the correct weight (gsm) and grain paper. I'm assuming you are using the bypass tray because you don't have a high capacity feeder (ohcf). An ohcf is a more robust feeder that holds more paper and has tighter specs. Is side one skewing or is it just with side two?
↧
Re: ERROR:Invaldifont
Ok. I will try the utility.
Do you have a link?
I can't find it.
↧
↧
Xerox WC 7225 network printing issue
Hi,
I have problem on Windows 8 Enterprise (x64bit) machine to connect to netwotk attached printer Xwrox WC7225.
When I set as default WC printer all file (specialy if they are at network device) freeze for a minute when I press ctrl+p, after printer dialog window open it takes 10 more secounds to connect to printer.
This problem appear with all type of printer drivers (PCL6 XPS etc.) I use WC72XX_PrintSetup.5.351.8.0 driver for win 8 x64 bit
If I put another network printer as default - there is no problem, same printer with same Windows work fine on another computers.
Could you please give me a clue, where could be the problem.
↧
How to configure Phaser 4622 to print to manual tray 1 in Windows 7/2008 R2
Hi All,
I have downloaded both 32/64 bits printer driver for Phaser 4622 and installed them on Windows 7/2008 R2, but couldn't find where to set the default manual tray 1
I need to print to manual tray (bypass) 1 from Windows application, while printing to tray 2 from RedHat Linux which is working since the default tray is 2.
Neither user or administrator guide touch on setting default tray when setup printer queue, which is a common requirement.
Your assistance would be much appreciated.
Thanks in advance,
George
↧
Re: ERROR:Invaldifont
↧
Re: Xerox WC 7225 network printing issue
i think you are running into the snmp bug/issue
can you use the global driver instead? in the latest version, they fixed the snmp latency
↧
↧
Color Qube 9303 - High Volume Finisher - Finisher Main Tray out of service.
I have a ColorQube 9303 machine attached to a high-volume finisher. The display is showing the following error message: "Finisher Main Tray out of service. Check for obstructions in the Main Tray." Copies and prints are coming out of the top finisher tray only and the stapling function has become disabled. A Xerox technician came and worked on this last week and it was corrected for a day or so but the issue has returned. I checked for obstructing staples and paper...and also reset all software. I didn't find any obstructions and the reset did not do any good. I will be calling the technician back but just seeing if anyone has any advice on here.
Thanks,
↧
Re: Manual duplex on C70 - not registering and skewing
Thank you for your response. I don't have a high capacity feeder so I am running through bypass. I am using coated 3/heavyweight 4 depending on which stock I am running for a job. And I never checked before but yes it is skewing on both sides. I always thought
it was just one. And first side is not centered, that is where the problem starts. And even though i"ve tried the alignment adjustment on SIQA, it doesnt seem to change anything. Thanks again for your time.
↧
Re: Color Qube 9303 - High Volume Finisher - Finisher Main Tray out of service.
I had this exact same issue with the HVF.. Tech came out 4 times, each time it would work for a while but eventually it would come back with same error.
The end result was the tech replacing the entire finisher under warranty.
↧