Quantcast
Channel: All Printing posts
Viewing all 22199 articles
Browse latest View live

Re: 7845 secure print dropping print jobs if supplies run out

$
0
0
Thank you so much, I just adjusted the port to LPR.

Re: Xerox Altalink C8000 Color Accuracy Issues

$
0
0

Alright all, let's try again, new firmware, new color fixes, no guarantee since I simply don't have time to test properly myself.

 

100.xxx.097.25400 releases.

 

C8070

 

C8045-C8055

 

C8030-C8035

Versant 80 Tray 5 Size Issue

$
0
0

Hi,

 

I successfully duplexed on regular 8.5x11 paper in tray 1. When I tried to do the same with 110 lb cardstock (the previous prints were tests), it would not print front and back on the heavier stock. I believe I need to use the bypass tray 5 to duplex on the heavier stock. However, even though the document size, all print settings in Adobe InDesign, and the Fiery settings are all 8.5x11, when I send the job to the printer, the Versant 80 tells me to load 11x15 paper. I checked and the size of the paper at tray 5 is set to 8.5x11, but it keeps telling me to load 11x15 even though I can't find that number anywhere. Please help!

 

Thanks,


Steve

Re: Xerox Altalink C8000 Color Accuracy Issues

$
0
0

there is also a new GPD out 5.548.8.2, does it also makes a difference? dont have the rls notes yet, probably you have it :)

Re: Versant 80 Tray 5 Size Issue

$
0
0

Export from Indesign to a PDF/x, then import that into the Fiery via CWS5 and print to whatever stock you want since it can't be overridden by the app or driver any more.

Phaser 7750dn imaging problems

$
0
0

Hello again, I was hoping someone could point me in the correct direction here.

My Phaser 7750dn, has had a lot of work lately,

Refurbished image and process controller boards 

New frame with the controller board

New Developer for the yellow.

new imaging units on Yellow and Magenta.

New Fuser

New toner cartridges on all.

I'm out of ideas, I have no repeating defects, smears or lines, the printer always prints fine from any PC, but when my atr dept uses their Mac with 10.8.5 OS and latest Xerox Driver for Mac 2.0.14 it is a hit or miss as to whether or not it will give a clean print, they either start to print clean and normal then it fades away on the next image, sometimes it fades on a omage after it started ok, other times it just prints faded images. I'll try to attach an image of about 4 differect prints maybe someone will have an answer for me. Thank you.Phaser images.jpg

D110 Secure Print Job Timeout

$
0
0
Is there a way to set a timeout time for secure print jobs on the D110? After a while jobs that were never released start piling up and the only way to clear is reboot or manually delete (which is no fun).

Re: Phaser 7750dn imaging problems

$
0
0

Since PC works and Mac doesn't, you are only troubleshooting the driver or the port.

 

Uninstall the printer and install it again, but do so manually using an HP Jet Direct port (This is the same as a Windows RAW port)

If that fails you would need to install either a newer or older driver, though I am not sure where to obtain either since it is no longer developed for and Apple doesn't distribute for it anymore either.

 

You could try this older Xerox Universal, it may list the 7750.


Re: D110 Secure Print Job Timeout

$
0
0

1) Select Log In/Out button (11111)
2) Select Machine Status button
3) Select Tools
4) Select System Settings (if not already selected)
5) Scroll down under the Group options and select "Stored File Settings"
6) Select "Stored Job Expiration Date" (option 2)
7) Select Change Setting
8) Set the desired options (to delete secureprint jobs) and then select Save
9) Select Close

Xerox 7800DN problem with toner cartridges

$
0
0

Hi! I Need help. I brought printer in Estonia, after start cartriges i insert cartriges buyed on ebay (germany). Now i brought original toners in Estonia and they don't accepted by printer. Seller says that chips don't match by region, because first installed cartridges from another region. How fix this?

Re: Xerox 7800DN problem with toner cartridges

$
0
0

2 choices, call Xerox and pay a fee to have it converted, or return your toners and continue buying from Germany via E-bay

Re: Xerox 7800DN problem with toner cartridges

$
0
0

How much to pay? How can i do it?

Re: Xerox 7800DN problem with toner cartridges

$
0
0

No idea how much.

If you could do it I would have told you how.

 

 

Re: Xerox 7800DN problem with toner cartridges

$
0
0

I ask how and with whom to contact about the discharge

Black Toner Smearing WorkCentre 7220i

$
0
0

I have a Xerox WorkCentre 7220i that has recently started having issues with the black portions of color printouts not fusing to the page and smearing across the page. We recently had the laser replaced as it failed four months after purchasing the WorkCentre and this issue seemed to start after the repair. It has a new fuser and laser in it and I don't know if something else is failing and need to have the tech come back again or maybe just a setting or need to replace some consumable supply.170913144643_0001.jpg


Re: Xerox Phaser 8560

$
0
0
Arsenal bấu víu Reiss Nelson: Trong hình bóng Fabregas
 
 
Chỉ mới 3 tháng trước, không một cổ động viên phổ thông nào biết đến cái tên Reiss Nelson. Cầu thủ sinh năm 1999 chỉ mới ký hợp đồng chuyên nghiệp với Arsenal vào ngày 10/12/2016. Anh mới chỉ được tập cùng với đội 1 chính thức lần đầu tiên trong tour giao hữu mùa Hè 2017. Ấy vậy mà Reiss Nelson giờ đang là cái tên khiến cổ động viên Arsenal hy vọng tột cùng, thay vì những Alexis Sanchez, Mesut Ozil hay Petr Cech... Cập nhật thông tin tại Xem các trận bóng đá hôm nay
 
Sau đó, đội ngũ truyền thông của Arsenal liên tục nhắc đến tên cầu thủ này trên các trang cá nhân của mình. Cổ động viên Arsenal thì kêu gào cho cầu thủ đá chính. Sau tour giao hữu mùa Hè, cầu thủ sinh năm 1999 gây ấn tượng. Đến trận giao hữu ở Emirates Cup, tờ báo chuyên viết về Benfica, Mais Futebol gọi Reiss Nelson là "siêu sao tiếp theo của bóng đá thế giới" khi chứng kiến anh hủy diệt Eliseu (cầu thủ chạy cánh hàng đầu Benfica).
 
Kể từ đó đến nay mới chỉ được 3 tháng và những bước phát triển của cầu thủ 17 tuổi dường như
"không giống quy trình bình thường". Anh tiến bộ quá nhanh. Reiss Nelson có trận đấu đầu tiên cho đội 1 Arsenal gặp Sydney FC (ở vị trí tiền vệ phải), sau đó là 3 trận đấu tiếp theo gặp Western Sydney Wanderers, Bayern Munich và Chelsea và hai trận ở Emirates Cup gặp Benfica và Sevilla.
 
Reiss Nelson giờ đang là cái tên khiến cổ động viên Arsenal hy vọng
 
 
"Tài năng của cậu ấy là không bàn cãi. Rất lâu rồi tôi mới thấy một cầu thủ xuất chúng như vậy," trung vệ Per Mertesacker nói với báo chí. Trong trận đấu thuộc khuôn giải dự bị Premier League hôm 14/08, "thần đồng" Reiss Nelson tiếp tục chuỗi phong độ ấn tượng của mình trong màu áo Arsenal.
 
Chỉ trong 4 phút từ 61 đến 65, Reiss Nelson ghi tới hai bàn (trong đó có một siêu phẩm solo từ giữa sân). Dù chỉ được sắp xếp chơi ở vị trí tiền vệ cánh phải, cái tên này cũng đã giúp Arsenal có màn lội ngược dòng 3-2 trước U23 Derby County - CLB đang chơi ở giải Hạng Nhất Anh (Championship).
 
Một điều đáng nói, trước đó đội U23 Arsenal, với sự góp mặt của nhiều cầu thủ ‘có số có má’ như Coquelin, Wilshere, Gibbs những vẫn bị U23 Derby County dẫn trước 0-2 từ sớm nhờ hai bàn thắng của K. Gordon (25') và E. Riis (56').
 
Nhưng khi vào mùa giải, Wenger vẫn chưa sử dụng cầu thủ 1 phút nào (ngoại trừ Siêu cúp Anh). Dù lúc này Reiss Nelson đang có phong độ cực cao trong màu áo U23 Arsenal. Cái tên này đã được trao giải thưởng cầu thủ hay nhất tháng 8 của Premier League 2, giải thưởng giành cho các đội dự bị Premier League.
 
Và những lời đánh giá sau đây của báo chí Bồ Đào Nha là đủ để người ta ấn tượng. Tờ báo chuyên viết về Benfica, Mais Futebol gọi Reiss Nelson là "siêu sao tiếp theo của bóng đá thế giới". Nhưng phải tới trận Benfica, anh mới phát lộ rõ nhất. "Nelson có thể qua người, đi bóng tự tin và ở hiện tại, cậu ấy có thể chơi những trận đấu kiểu như vậy," Wenger nói. Người ta chắc chắn sẽ trông chờ anh thi đấu ở Europa League, League Cup hay thậm chí là FA Cup mùa tới.
Trong 1 tháng qua, dù chơi ở vị trí tiền vệ cánh, cầu thủ này đã liên tục ghi bàn trong các trận đấu ở giải dự bị Premier League. Anh đã ghi 5 bàn sau 3 trận đầu tiên chơi cho U23 Arsenal (gặp Manchester City, Derby County và Liverpool) ở giải đấu này.
 
Reiss Nelson đang có phong độ cực cao trong màu áo U23 Arsenal
 
 
Mới đây, Reiss Nelson tiếp tục ghi bàn trong màu áo U23 Arsenal trong trận thắng 2-0 trước U23 Manchester United. Trong màu áo U19 Anh, cầu thủ này tiếp tục nổ súng trong trận thua 1-3 trước U19 Đức. Tổng cộng, cầu thủ đã ghi 11 bàn sau 16 trận chơi cho các đội U17, U18 và U19 Anh.
 
Khả năng đi bóng, tốc độ và kỹ thuật cá nhân tốt, không e ngại đối thủ trong các pha solo 1 vs 1 là điều hiếm gặp ở một cầu thủ 17 tuổi. Theo Tin thể thao trực tuyến , Nelson có tố chất để trở thành một cầu thủ chạy cánh hàng đầu. Anh đã ghi 7 bàn trong 43 lần ra sân cho đội trẻ Arsenal mùa trước.
 
Người ta cho rằng Arsenal nhiều khả năng sẽ mất Ozil, Sanchez, Wilshere, Cazorla và nhiều cái tên khi mùa giải năm nay kết thúc. Bầu không khí là vô cùng tồi tệ.
 
Cuộc tái sinh có thể bắt đầu với viên gạch Reiss Nelson? Wenger chưa bao giờ từ chối cơ hội cho các cầu thủ trẻ. Và hãy nhớ về Cesc Fabregas, cầu thủ trẻ nhất từng chơi cho đội 1 Arsenal trong các giải đấu chính thức, ở tuổi 16 và 177 ngày.
 
Nhưng nó cũng cho thấy một vấn đề: Sự sa sút và mất niềm tin ở Arsenal có vẻ đang vô cùng trầm trọng. Từ bao giờ các cổ động viên, thậm chí là đội ngũ làm truyền thông ở Arsenal phải bấu víu vào một cái tên còn chưa bao giờ thi đấu chính thức ở đội 1? hắc chắn sẽ trông chờ anh thi đấu ở Europa League, League Cup hay thậm chí là FA Cup mùa này.

Need an older printer driver

$
0
0

Hello everyone, 

 

I need the Xerox GPD PCL 6 in Version 5520.600.0.0 for Windows 10 and 7 x64. 

 

We are needing this because the new drivers seem incompatible with the ones in our Citrix Servers. 

The Auto-Created Printer doesn't recognize the attached finisher and doesn't give us the option in Citrix to staple. 

 

thanks!

 

Re: Xerox Altalink C8000 Color Accuracy Issues

$
0
0

It looks like the firmware has been taken offline until tonight. I will try when it comes back.

 

Has anyone reported any issues with Print jobs not getting to the printer? the only way to get them to come through is by restarting the device. I'm contemplating rebuilding the print server but its worked perfectly for years on our old machines.

 

Really not like the C8000 series so far, i would advise anyone thinking of upgrading to this device to wait until they sort the issues out. I've had nothing but problems with it.

Re: Xerox Altalink C8000 Color Accuracy Issues

$
0
0

yes, color is a mess right now

i installed the 25400 release, and had the inverted issues, but resolved by doing the calibration again

 

but dont have the problem that the prints are not coming through

Re: Need an older printer driver

Viewing all 22199 articles
Browse latest View live